Prof. V. Pandu Ranga

Publications

1Sahoo, P.S., Mahapatra, M.M., Vundavilli, P.R. et al. Effects of Working Temperature on Microstructure and Hardness of Ti-6Al-4V Alloy Subjected to Asymmetrical Rolling. J. of Materi Eng and Perform (2023). https://doi.org/10.1007/s11665-023-08076-0
2Priyaranjan Samal, Harihar Tarai, Arabinda Meher, B. Surekha, Pandu R. Vundavilli, Effect of SiC and WC reinforcements on microstructural and mechanical characteristics of Copper alloy-based metal matrix composites using stir casting route, Applied Sciences, Vol. 13, 1754, Jan 2023.
3Hrudaya J.B, Pandu R Vundavilli, K. Mondal, N.P. Shetti and A Gupta, ZnO/CuO nanostructures anchored over Ni/Cu tubular films via pulse electrodeposition for photocatalytic and antibacterial applications, Material Science for Energy Technologies, Vol. 6, Jan 2023, pp. 237-251.
4P.G. Rao, Pandu R Vundavilli and Ravi Kumar Madava, Tribological Behaviour of Al6061/Gr/WC Hybrid MMC’s using Multi-Response Optimization, International Journal of Mathematical Modeling and Numerical Optimization, Vol. 13, No. 2, 2023, pp. 123-146.
5K. Srinivas, Pandu R Vundavilli and M.M. Hussain, Experimental investigation on microstructural characterization and mechanical properties of plasma arc welded Inconel 617 plates, High-Temperature Materials and Processes, Vol. 41, pp. 683-693, Dec. 2022.
6V.S. Varma, R. Yogeswara Rao, Pandu R Vundavilli, M.K. Pandit and P.R. Budarapu, A Machine Learning-based Approach for the Design of Lower Limb Exoskeleton, International Journal of Computational Methods, Vol. 19, No. 8, 2022, pp. 2142012_1_22.
7Jishnu A K, Dev Singh Chauhan and Pandu R Vundavilli, Design of neural network based adaptive inverse dynamics controller for motion control of stewart platform, International Journal of Computational Methods, Vol. 19, No. 8, 2022, pp. 2142010_1_35.
8Dev Singh Chauhan and Pandu R Vundavilli, Forward kinematics of the stewart parallel manipulator using machine learning, International Journal of Computational Methods, Vol. 19, No. 8, 2022, pp. 2142009_1_22.
9A. Meher, M.M. Mahapatra, P. Samal, Pandu R. Vundavilli and K.V. Shankar, Statistical modeling on machinability of RZ5/TiB2 in-situ magnesium matrix composite in dry turning condition, Crystals, Vol. 12, No.10, 1353, Sept. 2022.
10Hrudaya J.B, Pandu R Vundavilli and A Gupta, Facile Fabrication of Hydrophobic ZnO Nanostructured Nickel Microtubes through Pulse Electrodeposition as Promising Photocatalyst for Wastewater Remediation, Journal of Manufacturing Processes, Vol. 75, pp. 538-551, 2022.
11Deepak Parappagoudar, Ravi Kumar Mandava, Pandu R Vundavilli and Balaji Betadur, An Efficient Path Planning Algorithm for the Biped Robot in a Static Environment using Fast Sweeping Method, Proc. of IMech E, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 13, pp. 7417-7425, 2022.
12A. Meher, M.M. Mahapatra, P. Samal and Pandu R. Vundavilli, A review on manufacturability of magnesium matrix composites: Processing, tribology, joining and machining, CIRP Journal of Manufacturing Science and Technology, Vol. 39, pp. 134-158, 2022.
13Hrudaya J.B, Jaskaran Jot kaur, Pandu R Vundavilli and Ankur Gupta, Recent advances in energy field assisted hybrid electrodeposition and electroforming processes, CIRP Journal of Manufacturing Science and Technology, Vol. 38, pp. 518-546, 2022
14P. Samal, B. Surekha and Pandu R. Vundavilli, Experimental investigations on microstructure, mechanical behavior and tribological analysis of AA5154/SiC composites by stir casting, Silicon, Vol. 14, pp. 3317-3328, May 2022.
15P. Samal, Pandu R. Vundavilli, Arabinda Mehar and M.M. Mahapatra, Multi-Response Modeling for Sliding Wear Behavior of AA5052/TiC Composites by Stir Casting: A Comparative Analysis using Response Surface Methodology and Fuzzy Logic System, Proc. of IMechE- Part E: Journal of Process Mechanical Engineering, Vol. 236, No. 2, pp. 254-266, April 2022.
16P. Samal, Pandu R. Vundavilli, Arabinda Mehar and M.M. Mahapatra, Reinforcing effect of multi-walled carbon nanotubes on microstructure and mechanical behavior of AA5052 composites assisted by in-situ TiC particles, Ceramics International, Vol. 48, No. 6, pp. 8245-8257, March 2022.
17Aniket Das, Pandu R. Vundavilli, B. Surekha and V. Srinivasa Sai, Experimental investigations on the electrodeposition of Ni on copper substrate, International Journal of Manufacturing Technology and Management, Vol. 35, No. 5, pp. 443-454, March 2022.
18Vijay Kumar G, S.K. Parashar, S. Klykov, Pandu R Vundavilli, S. Sevda, S.K. Srivastava and M.J. Taherzadeh, Invasive weed optimization coupled biomass and product dynamics of tuning soybean husk towards lipolytic enzyme, Bioresource Technology, 344, 2022, 126254
19S. Pradhan, Ravi Kumar M and Pandu R. Vundavilli, Development of path planning algorithm for biped robot using combined multi-point RRT and visibility graph, Int. J. inf. Tecnol, Vol. 13, pp. 1513-1519, 2021
20Ravi Kumar Mandava and Pandu R. Vundavilli, Design and development of an adaptive torque-based proportional-integral-derivative controller for a two-legged robot, Soft Computing, Vol. 25, No. 9, pp. 10953-10968, 2021.
21P. Samal, D. Mani Babu, S. Venkat Kiran, B. Surekha, Pandu R. Vundavilli, and Animesh Mandal, Study of microstructural and machining characteristics of hypereutectic Al-Si alloys using Wire-EDM for photovoltaic application, Silicon, Vol. 13, pp. 4407-4419, 2021.
22A. Meher, M.M. Mahapatra, P. Samal and Pandu R. Vundavilli, Abrasive wear bahaviour of TiB2 reinforced in-situ synthesized magnesium RZ5 alloy based metal matrix composites, Metals and Materials International, Vol. 27, pp. 3652-3665, 2021.
23Abhishek M Chheda, Ravi Kumar M and Pandu R Vundavilli, Design and development of two-wheeled self-balancing robot and its controller, Int. Journal of Mechatronics and Automation, Vol. 8, No.1, pp. 1-8, Mar 2021
24Hrudaya J.B., P. Rout, Pandu R Vundavilli and A Gupta, Laser-assisted micro hole fabrication in a flexible polymer substrate, lasers in Engineering, Vol. 49, No. 1-3, pp. 3-20, Mar 2021.
25Hrudaya J.B, A. Yadav, Pandu R Vundavilli and Ankur Gupta, High aspect ZnO nanorod growth over electrodeposited tubes for photocatalytic degradation of EtBr die, Royal Society of Chemistry (RSC) advances, Vol. 11, No. 3, pp. 1623-1534, Jan 2021
26Hrudaya J.B, Pandu R Vundavilli and Ankur Gupta, Perspective – Electrodeposition of graphene reinforced metal matrix composites for enhanced mechanical and physical properties: A review, Journal of the Electrochemical Society, Vol. 167, pp. 146501, Dec. 2020.
27P. Samal, Pandu R. Vundavilli, Arabinda Mehar and M.M. Mahapatra, Recent progress in aluminum metal matrix composites: a review on processing, mechanical and wear properties, Journal of Manufacturing Processes, Vol. 59, pp. 131-152, November 2020.
28A. Meher, M.M. Mahapatra, P. Samal and Pandu R. Vundavilli, Study on effect of TiB2 reinforcement on the microstructural and mechanical properties of magnesium RZ5 alloy based metal matrix composites, Journal of Magnesium and Alloys, Vol. 8, No. 3, pp. 780-792, Sept. 2020
29P. Samal, Ravi Kumar Mandava and Pandu R. Vundavilli, Dry sliding wear behavior of Al6082 metal matrix composites reinforced with red mud particles, SN applied Sciences, Vol. 2, No. 2, pg. 313, Jan 2020.
30K. Srinivas, Pandu R. Vundavilli and M.M. Hussain, Non-linear modeling of mechanical properties of plasma arc welded Inconel 617 plates, Materials Testing, Vol. 61, No. 8, pp. 770-778, Aug. 2019.
31Ravi Kumar Mandava and Pandu R. Vundavilli, An Adaptive PID Control Algorithm for the Two Legged Robot Walking on a Slope, Neural Computing and Applications, Vol. 32, pp. 3407-3421, 2020.
32Ravi Kumar Mandava, K. Mrudul and Pandu R. Vundavilli, Dynamic motion planning algorithm for a biped robot using fast marching method hybridized with regression search, Acta Polytechnica Hungarica, Journal of Applied Science, Vol. 16, No. 1, pp. 189-208, Mar. 2019.
33Ravi Kumar Mandava and Pandu R. Vundavilli, An optimal PID controller for a biped robot walking on flat terrain using MCIWO algorithm, Evolutionary Intelligence, Vol. 12, No. 1, pp. 33-48, Mar. 2019.
34Ravi Kumar Mandava, K. Mrudul and Pandu R. Vundavilli, Application of hybrid fast marching method to determine the real time for the biped robot, Journal of Intelligent Service Robotics, Vol. 12, No. 1, pp. 125-136, Jan. 2019.
35P.K. Behera, Ravi Kumar M and Pandu R. Vundavilli, Push recovery system and balancing of a biped robot on steadily increasing slope of an inclined plane, International Journal of Computational Vision and Robotics, Vol. 9, No. 1, pp. 70-79, Feb. 2019
36Ravi Kumar Mandava, Sukesh Bondada and Pandu R. Vundavilli, An optimized path planning for the mobile robot using potential field method and PSO algorithm, Soft Computing for Problem Solving, Advances in Intelligent Systems and Computing 817, Edited by J.C. Bansal et al. pp. 139-150, 2018, Springer.
37Ravi Kumar Mandava and Pandu R Vundavilli, “Design of Neural Network based PID Controller while Walking on Stair Case Ascending & Descending Surfaces”, Advanced Mathematical Techniques in Engineering Sciences, Chapter 12, pp. 227-246, 2018, Edited by Mangey Ram and J. Paulo Davim, CRC Press.
38M. Patel, P. Krishna, M.B. Parappagoudar, Pandu R. Vundavilli, S.N.B. Bhushan, Sqeeze casting parameter optimization using swarm intelligence and evolutionary algorithms, Critical Developments and Applications of Swarm Intelligence, Edited by Yuhui Shi, Chapter 10, Feb. 2018.
39Ravi Kumar Mandava and Pandu R. Vundavilli, Whole body motion generation of 18-DOF biped robot on flat surface during SSP and DSP, International Journal of Modeling Identification and Control, Vol. 29, No. 3, pp. 266-277, 2018.
40S. Deepak Kumar, Pandu R Vundavilli, A. Mandal, S. Mantry and M. Chakraborty, Erosion response of thixoformed A356-5TiB2 in-situ composite using Taguchi’s experimental design, Tribology Transactions, Vol. 60, No. 1, pp. 39-46, Jan 2017.
41G.C. Manjunath Patel, Prasad Krishna, Pandu R Vundavilli and M.B. Parappagoudar, Multi-objective optimization of squeeze casting process using genetic algorithm and particle swarm optimization, Archives in Foundry Engineering, Vol. 16, No. 3, pp. 172-186, Nov. 2016.
42D. Mani Babu, S. Venkat Kiran, Pandu R. Vundavilli and A. Mondal, Experimental investigations and multi response optimization of wire electric discharge machining of hypereutectic Al-Si alloys, International Journal of Manufacturing Research, Vol. 11, No. 3, pp. 221-237, Oct 2016.
43Akash Deep Chhabra, R. Vinod Kumar, Pandu R Vundavilli and B. Surekha, Design and analysis of higher order exponential horn profiles for ultrasonic machining, Journal for Manufacturing Science and Production, Vol. 16, No.1 pp. 13-19, Jan-Mar 2016
44M. Ravi Kumar, L. Sasirekha Lathan and Pandu R. Vundavilli, Dynamically balanced obstacle crossing gait generation of a biped robot using neural networks, International Journal of Mechanisms and Robotic Systems, Vol. 2, No. ¾, pp. 232-253, Oct, 2015.
45Pandu R. Vundavilli, J. Phani Kumar, Ch. Sai Priyatham and Mahesh B. Parappagoudar, Neural network-based expert system for modeling of tube spinning process, Neural Computing and Applications, Vol. 26, No. 6, pp. 1481-1493, Aug. 2015.
46K. Shanmukhi, Pandu R. Vundavilli and B. Surekha, Modeling of ECDM micro drilling process using GA and PSO trained radial basis function neural network, Soft Computing, Vol. 19, No. 8, pp. 2193-2202, Aug 2015.
47Pandu R. Vundavilli, B. Surekha and Mahesh B. Parappagoudar, ABC and GA optimized NN to model resin bonded mould/core sand system: A soft computing-based approach, Journal of Manufacturing Science and Production, Vol. 14, No. 4, pp. 257-267, November 2014.
48G. Vijay Kunar, Pandu R. Vundavilli and Rintu Benerjee, Enhanced lipage recovery through RSM integrated differential evolution approach from the fermented biomass, Brazilian Archives of Biology and Technology, Vol. 56, No. 5, pp. 699-709, Sept-Oct 2013.
49B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R. Vundavilli and Mahesh B. Parappagoudar, Prediction of resin bonded sand core properties using fuzzy logic, Journal of Intelligent and Fuzzy Systems, Vol. 25, pp. 595-604, June 2013.
50Panu R. Vundavilli, J. Phani Kumar and M. Srinivasa Rao, Evolutionary and swarm-based optimization of turning of GFRP composites using PCD tooling, Academic Journal of Manufacturing Engineering, Vol. 11, No. 1, pp. 125-130, March 2013.
51B. Surekha, Pandu R. Vundavilli and M.B. Parappagoudar, “Forward and reverse mappings of the cement bonded sand mould system using fuzzy logic”, International Journal of Advanced Manufacturing Technology, Vol. 61, No. 9-12, pp. 843-854, August 2012.
52B. Surekha, D. Hanumantha Rao, G. Krishna Mohana Rao, Pandu R Vundavilli and M. B. Parappagoudar, Modeling and analysis of resin bonded sand mould system using design of experiments and central composite design, Journal for Manufacturing Science and Production, Vol. 12, No. 1, pp. 31-50, April 2012.
53B. Surekha, Pandu R. Vundavilli and M.B. Parappagoudar “Reverse modeling of green sand mould systems using fuzzy logic-based approaches”, Journal for Manufacturing Science and Production, Vol. 12, No. 1, pp. 1-16, April 2012.
54Pandu R. Vundavilli, M.B. Parappagoudar, K. Shyam Prasad and B. Surekha, Fuzzy logic based expert system for prediction of depth of cut in abrasive water jet machining process, Knowledge Based Systems, Vol. 27, pp. 456-464, March 2012.
55B. Surekha, Lalith K. Kaushik, Abhishek K. Pandey and Pandu R. Vundavilli, “Multi-objective optimization of green sand mould system using evolutionary algorithms”, International Journal of Advanced Manufacturing Technology, Vol. 58, No. 1-4, pp. 9-17, Jan. 2012.
56B. Surekha, Pandu R. Vundavilli, R.P. Bhat and M.B. Parappagoudar, “Forward and reverse mappings in metal casting – A step towards quality casting and automation”, AFS Transactions – American Foundry Society, Vol. 119, 2011, pp. 19-34.
57Pandu R. Vundavilli, and D.K. Pratihar, “Balanced gait generations of a two-legged robot on sloping surface”, Sadhana- Academy proceedings in Engineering Science, Vol. 36, No. 4, pp. 525-550, August 2011.
58B. Surekha, Pandu R. Vundavilli, M.B. Parappagoudar and A. Srinath, “Design of genetic-fuzzy system for forward and reverse mapping of green sand mould system”, International Journal of Cast Metal Research, Vol. 24, No. 1, (2011), pp. 53-64.
59Pandu R. Vundavilli, and D.K. Pratihar, “Near-optimal gait generations of a two-legged robot on rough terrains using soft computing”, Robotics and Computer Integrated Manufacturing. Vol. 27, No. 3, (2011), pp. 512-530. (IF: 1.230-2012)
60Pandu R. Vundavilli, and D.K. Pratihar, “Dynamically balanced optimal gaits of a ditch-crossing biped robot”, Robotics and Autonomous Systems, Vol. 58, (2010) pp. 349-361.
61Vijay Kumar, G, Pandu R, Vundavilli and Rintu, B, “Evaluation of lipase production by genetic algorithm and particle swarm optimization and their comparative study”, Journal of Applied Biochemistry and Bio Technology Vol. 162, No. 5, (2010), pp. 1350-1361.
62Ravi Kumar Mandava and Pandu R. Vundavilli, Near optimal PID controllers for the biped robot while walking on uneven terrains, International Journal of Automation and Computing, Vol. 15, No. 6, pp. 689-706, Nov. 2018
63P. Gangadhara Rao, A. Gopalakrishna and Pandu R. Vundavilli, Response surface methodology based modeling of friction-wear behavior of Al6061/9%Gr/WC hybrid MMCs and its optimization using Fuzzy GRA, Transactions of the Indian Institute of Metals, Vol. 71, No. 10, pp. 2465-2478, 2018.
64Ravi Kumar Mandava and Pandu R. Vundavilli, Implementation of modified chaotic invasive weed optimization algorithm for optimizing the PID controller of the biped robot, Sadhana, Vol. 43, No. 3, pp. 1-18, 2018
1Katla Mrudul, Ravi Kumar Mandava and Pandu R. Vundavilli, An efficient path planning algorithm for biped robot using fast marching method, Procedia Computer Science, Vol. 133, pp. 116-123, 2018.
2Ravi Kumar Mandava and Pandu R. Vundavilli, Tuning of PID controller parameters of a biped robot using IWO algorithm, Proc. of the 2018 4th International Conference on Mechatronics and Robotics Engineering, Paris, France, Feb 7-11, 2018 (Published by ACM Digita Library).
3Vijay Kumar G, Pandu R. Vundavilli and Rintu Banerjee, Optimization of flavor ester production through artificial bee colony algorithm, 4th International Conference on Image Information Processing, Dec. 21-23, 2017, Published by IEEE, pp. 112-115.
4Ravi Kumar M and Pandu R. Vundavilli, Forward and inverse kinematics based full body gait generation of biped robot, Proc. of IEEE International Conference on Electrical, Electronics and Optimization Techniques, 3-5 March 2016, pp. 3301-3305.
5Ravi Kumar M, Pandu R. Vundavilli, Design of PID Controller for a 4 DOF Planar and Spatial Manipulators, International Conference on Robotics, Automation control and Embedded Systems, 18-21 February 2015, Chennai, Published by IEEE (DOI: 10.1109/RACE.2015.7097269).
6S Deepak Kumar, Pandu R Vundavilli, Animesh Mandal and Madhusudan Chakraborty, Optimization of process parameters during machining of Thixoformed A356-5TiB2 in-situ Composite using Design of Experiments, International Conference on Robotics, Automation control and Embedded Systems, 18-21 February 2015, Chennai, Published by IEEE (DOI: 10.1109/RACE.2015.7097253).
7Ponugoti Gangadhararao, A Gopala Krishna and Pandu R Vundavilli, Parameter Optimization of Al-SiC Metal Matrix Composites Produced using Powder-based Process, International Conference on Robotics, Automation control and Embedded Systems, 18-21 February 2015, Chennai, Published by IEEE (DOI: 10.1109/RACE.2015.7097265).
8Pandu R Vundavilli, Obstacle crossing gait generation of a two-legged robot using differential evolution trained neural networks, International Conference on Production and Mechanical Engineering, Organized by IAIMAE, Bangkok (Thailand), pp. 48-53, 30-31 Dec. 2014 (ISBN: 978-93-84468-12-5).
9B. Surekha, D. Hanumanta Rao, G. Krishna Mohana Rao and Pandu R Vundavilli, Design and development of knowledge-base scheme for chromite-based resin bonded sand core system, International Conference on Materials Processing and Characterisation, Published by Procedia Material Science, Vol. 6, pp. 919-925, Sept. 2014.
10S. Deepak Kumar, Pandu R Vundavilli, S. Mantri, A. Mandal and M. Chakraborty, A Taguchi optimization of cooling slope casting process parameters for production of semi-solid A356 alloy and A356-5TiB2 in-situ composite feedstock, International Conference on Advances in Manufacturing and Materials Engineering, Published by Procedia Material Science, Vol.5, pp. 232-241, Sept. 2014.
11B. Surekha, D. Hanumanta Rao, G. Krishna Mohana Rao and Pandu R. Vundavilli, Experimental studies on properties chromite-based resin bonded sand system, Recent Advances in Robotics, Aeronautical and Mechanical Engineering, Vouliagmeni, Athens, Greece, pp. 230-238, May 14-16, 2013.
12M.B. Parappagoudar and Pandu R. Vundavilli, Application of modeling tools in manufacturing to improve quality and productivity with case study, International Conference on Manufacturing System, Organized on Nov. 8-9, 2012, at Bucharest, Romania.
13Pandu R. Vundavilli, J. Phani Kumar, A. Madhu Kiran, P. Parikshit and Sk. Md. Yaseen, Application of mamadani-based fuzzy logic controller for prediction of geometrical requirements of injection moulded parts, International Conference on Advances in Manufacturing Technology, Organized by Chennai Institute of Technology, Chennai, India, 15-17 June 2012.
14L. Sasi Rekha Lathan, B.N. Sudha Rani and Pandu R. Vundavilli, Analytical approach for generating dynamically balanced gaits for obstacle crossing biped robot, IEEE International Conference on Advances in Engineering, Science and Management, Organized by E.G.S. Pillay Engineering College, Nagapattanam, 30 and 31st March 2012, pp. 187-191.
15Pandu R. Vundavilli, J. Phani Kumar and Ch. Sai Priyatham, Parameter optimization of wire electric discharge machining process using GA and PSO, IEEE International Conference on Advances in Engineering, Science and Management, Organized by E.G.S. Pillay Engineering College, Nagapattanam, 30 and 31st March 2012, pp. 180-185.
16B.N. Sudha Rani, L. Sasirekha Lathan and Pandu R. Vundavilli, Optimal Walking of a biped robot on stair with deformed sole using genetic algorithms, International Conference on Materials Processing and Characterization, Organized by Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, 8-10 March 2012, pp. 455-460.
17R. Satish Babu, Pandu R. Vundavilli and M. Lakshmi Narasu, Optimization of α-Amylase production from Aspergilus Niger using spoiled starch rich vegetables by response surface methodology and genetic algorithm, IEEE INDICON 2011, BITS Hyderabad, Dec 16th to 18th 2011, Hyderabad, (DOI: 10.1109/INDCON.2011.6139617).
18G. Vijay Kumar, Rintu B and Pandu R. Vundavilli, Integration of RSM model for optimization of immobilized lipase mediated solvent free synthesis of flavor ester by genetic algorithm, IEEE International Conference on Image Information Processing, Organized by Jaypee University of Information Technology, Shimla, H.P, India, Nov, 3-5, 2011, (DOI: 10.1109/ICIIP.2011.6108936)
19Pandu R. Vundavilli, Ch. Swetha, B. Swathi, K.M.V. Ravi Teja, K. Pratap and T.V. Ranganath, Fuzzy logic-based modeling of abrasive water jet machining process, International Conference on Advances in Engineering and Technology, Organized by E.G.S. Pillay Engineering College, On 27 & 28th May 2011.
20S. Ramarao, CRM Sravan, Pandu R. Vundavilli and G. Padmanabhan, “Fuzzy logic-based forward modeling of electro chemical machining process”, Accepted by International Symposium on Innovations in Natural Computing (INC-2009), Dce 12-13, 2009, Cochin, India. Published in IEEE proceedings of the World Congress on Nature and Biologically Inspired Computing (NaBIC’09), December 09-11, 2009, pp. 1431-1435, Coimbatore, India.
21P. Shrivastava, Pandu R. Vundavilli and D.K. Pratihar, “An approach to 3D reconstruction of environment using stereo-vision system”, IEEE Region 10 Colloquium and International Conference on Industrial and Information Systems (ICIIS-2008), Dec 8-11, 2008, IIT Kharagpur, India. (DOI: 10.1109 /ICIINFS.2008.4798358).
22Tushar, Pandu R. Vundavilli and D.K. Pratihar, “Dynamically balanced staircase ascending gait generation of a biped robot”, IEEE Region 10 Colloquium and International Conference on Industrial and Information Systems (ICIIS-2008), Dec 8-11, 2008, IIT Kharagpur, India. (DOI: 10.1109 /ICIINFS.2008.4798359).
23Pandu R. Vundavilli and D.K. Pratihar, “Ditch-crossing gait generation of a two-legged robot using soft computing”, Third Innovative Conference on Embedded systems, Mobile Communication and Computing (ICEMC¬2-2008), Infosys, Mysore, India, August 11-14, 2008, pp. 237-245.
24B. Surekha, Pandu R. Vundavilli, “Modeling and optimization of abrasive flow machining using soft computing”, in Proc. of International Conference on Recent Advances in Materials, Processing and Characterization (RAM – 2008), V. R. Siddartha Engineering College, Vijayawada, India, 3rd to 4th July 2008, pp. 246-252.